انت هنا الان : شبكة جامعة بابل > موقع الكلية > نظام التعليم الالكتروني > مشاهدة المحاضرة
الكلية كلية طب الاسنان
القسم ترميم ومعالجة الاسنان
المرحلة 4
أستاذ المادة احمد غانم مهدي الهلال
4/18/2011 5:20:55 PM
Access Cavity Preparation
Endodontic Coronal Cavity Preparation
I. Outline Form
II. Convenience Form
III. Removal of the remaining carious dentin (and defective restorations)
IV. Toilet of the cavity.
Endodontic Radicular Cavity Preparation
I and II. Outline Form and Convenience Form (continued)
IV. Toilet of the cavity (continued)
V. Retention Form
VI. Resistance Form
Access opening rely, is the key of endodontics.
Rules for proper access preparation: to ensure that the most efficient access cavity is prepared, the following rules should be observed:
1. give direct access to the apical foramen, not only to the canal orifice.
2. access cavity preparations are different from typical operative occlusal preparations, in that they are not depend on the topography of occlusal grooves, pits, fissures and on the avoidance of underlying pulp. But the need to uncovering the roof of the pulp chamber and divergent walls.
3. the likely interior anatomy of the tooth under treatment must be determined.
4. endodontic entries are prepared through the occlusal or lingual surface-never through the proximal or gingival surface.
5. as part of the access preparation, the unsupported cusps of posterior teeth must be reduced.
Principle I. Outline form:
The outline form of the endodontic cavity must be correctly shaped and positioned to establish complete access for instrumentation, from cavity margin to apical foramen. Moreover, external outline form evolves from the internal anatomy of the tooth established by the pulp. Because of this internal-external relationship, endodontic preparations must of necessity be done in a reverse manner, from the inside of the tooth to the outside. That is to say, external outline form is established by mechanically projecting the internal anatomy of the pulp onto the external surface. This may be accomplished only by drilling into the open space of the pulp chamber and then working with the bur from the inside of the tooth to the outside, cutting away the dentin of the pulpal roof and walls overhanging the floor of the chamber. This intracoronal preparation is contrasted to the extracoronal preparation of operative dentistry, in which outline form is always related to the external anatomy of the tooth. The tendency to establish endodontic outline form in the conventional operative manner and shape must be resisted. To achieve optimal preparation, three factors of internal anatomy must be considered:
(1) the size of the pulp chamber,
(2) the shape of the pulp chamber, and
(3) the number of individual root canals, their curvature, and their position.
Size of Pulp Chamber. The outline form of endodontic access cavities is materially affected by the size of the pulp chamber. In young patients, these preparations must be more extensive than in older patients, in whom the pulp has receded and the pulp chamber is smaller in all three dimensions. This becomes quite apparent in preparing the anterior teeth of youngsters, whose larger root canals require larger instruments and filling materials—materials that, in turn, will not pass through a small orifice in the crown. Shape of Pulp Chamber. The finished outline form should accurately reflect the shape of the pulp chamber. For example, the floor of the pulp chamber in a molar tooth is usually triangular in shape, owing to the triangular position of the orifices of the canals. This triangular shape is extended up the walls of the cavity and out onto the occlusal surface; hence, the final occlusal cavity outline form is generally triangular. As another example, the coronal pulp of a maxillary premolar is flat mesiodistally but is elongated buccolingually. The outline form is, therefore, an elongated oval that extends buccolingually rather than mesiodistally, as does Black’s operative cavity preparation. Number, Position, and Curvature of Root Canals. The third factor regulating outline form is the number, position, and curvature or direction of the root canals. To prepare each canal efficiently without interference, the cavity walls often have to be extended to allow an unstrained instrument approach to the apical foramen. When cavity walls are extended to improve instrumentation, the outline form is materially affected. This change is for convenience in preparation; hence, convenience form partly regulates the ultimate outline form.
Principle II: Convenience Form
Convenience form was conceived by Black as a modification of the cavity outline form to establish greater convenience in the placement of intracoronal restorations. In endodontic therapy, however, convenience form makes more convenient (and accurate) the preparation and filling of the root canal. Four important benefits are gained through convenience form modifications:
(1) unobstructed access to the canal orifice,
(2) direct access to the apical foramen,
(3) cavity expansion to accommodate filling techniques, and
(4) complete authority over the enlarging instrument.
1- Unobstructed Access to the Canal Orifice.
In endodontic cavity preparations of all teeth, enough tooth structure must be removed to allow instruments to be placed easily into the orifice of each canal without interference from overhanging walls. The clinician must be able to see each orifice and easily reach it with the instrument points. Failure to observe this principle not only endangers the successful outcome of the case but also adds materially to the duration of treatment.
In certain teeth, extra precautions must be taken to search for additional canals. The lower incisors are a case in point. Even more important is the high incidence of a second separate canal in the mesiobuccal root of maxillary molars. A second canal often is found in the distal root of mandibular molars as well. The premolars, both maxillary and mandibular, can also be counted on to have extra canals. During preparation, the operator, mindful of these variations from the norm, searches conscientiously for additional canals. In many cases, the outline form has to be modified to facilitate this search and the ultimate cleaning, shaping, and filling of the extra canals.
2- Direct Access to the Apical Foramen.
To provide direct access to the apical foramen, enough tooth structure must be removed to allow the endodontic instruments freedom within the coronal cavity so they can extend down the canal in an unstrained position. This is especially true when the canal is severely curved or leaves the chamber at an obtuse angle. Infrequently, total decuspation is necessary.
3- Extension to Accommodate Filling Techniques.
It is often necessary to expand the outline form to make certain filling techniques more convenient or practical. If a softened gutta-percha technique is used for filling, wherein rather rigid pluggers are used in a vertical thrust, then the outline form may have to be widely extended to accommodate these heavier instruments.
4- Complete Authority over the Enlarging Instrument.
It is imperative that the clinician maintain complete control over the root canal instrument. If the instrument is impinged at the canal orifice by tooth structure that should have been removed, the dentist will have lost control of the direction of the tip of the instrument, and the intervening tooth structure will dictate the control of the instrument. If, on the other hand, the tooth structure is removed around the orifice so that the instrument stands free in this area of the canal, the instrument will then be controlled by only two factors: the clinician’s fingers on the handle of the instrument and the walls of the canal at the tip of the instrument. Nothing is to intervene between these two points.
Failure to properly modify the access cavity outline by extending the convenience form will ultimately lead to failure by either root perforation, “ledge” or “shelf” formation within the canal, instrument breakage, or the incorrect shape of the completed canal preparation, often termed “zipping” or apical transportation.
Principle III: Removal of the Remaining Carious Dentin and Defective Restorations
Caries and defective restorations remaining in an endodontic cavity preparation must be removed for three reasons:
(1) to eliminate mechanically as many bacteria as possible from the interior of the tooth,
(2) to eliminate the discolored tooth structure, that may ultimately lead to staining of the crown, and (3) to eliminate the possibility of any bacteria-laden saliva leaking into the prepared cavity. The last point is especially true of proximal or buccal caries that extend into the prepared cavity.
After the caries are removed, if a carious perforation of the wall is allowing salivary leakage, the area must be repaired with cement, preferably from inside the cavity.
Methods of determining anatomical details:
1. A radiograph many clues to anatomic “aberrations” lateral radiolucencies indicating the presence of lateral or accessory canals, an abrupt ending of a large canal significantly a bifurcation, where it is assumed that it has bifurcation (or trifurcation) in to much finer diameters. To confirm this division a second radiograph is exposed from mesial angulations of 10 to 30 degrees. The resulting film shows either more roots or multiple vertical lines indicating the peripheries of additional root surfaces. A knoblike image indicating an apex that curves toward or away from beam of the x-ray . multiple vertical lines indicating the possibility of a thin root, which may be hourglass shaped in cross section and susceptible to perforation.
2. the endodontic pathfinder inserted into the orifice openings reveals the direction that the canals take in leaving the main chamber.
3. digital perception with a hand instrument can identify curvatures, obstruction, root division and additional canal orifices.
4. fiber-optic illumination can reveal calcifications, orifice location, and fractures.
5. further knowledge of root formation can save the clinician difficulties with instrumentation. For example what appears radiographically to be normal palatal root of maxillary first molar, but is actually a root with a sharp apical curvature toward the buccal.
6. ethnic characteristics and other physical differences can be occurs, for example the occurrence of 4 canals in mandibular first molars.
المادة المعروضة اعلاه هي مدخل الى المحاضرة المرفوعة بواسطة استاذ(ة) المادة . وقد تبدو لك غير متكاملة . حيث يضع استاذ المادة في بعض الاحيان فقط الجزء الاول من المحاضرة من اجل الاطلاع على ما ستقوم بتحميله لاحقا . في نظام التعليم الالكتروني نوفر هذه الخدمة لكي نبقيك على اطلاع حول محتوى الملف الذي ستقوم بتحميله .
|