General WebFig Manual

Manual:Webfig
Summary
WebFig is a web based RouterOS configuration utility. It is accessible directly from the router and no additional
software is required (except web browser with JavaScript, of course).
As Webfig is platform independent, it can be used to configure router directly from various mobile devices without
need of a software developed for specific platform.
WebFig is designed as an alternitive of WinBox, both have similar layouts and both have access to almost any
feature of RouterOS.
Connecting to Router
WebFig can be launched from the
routers home page which is accessible
by entering routers IP address in the
browser. When home page is
successfully loaded, choose webfig
from the list of available icons as
illustrated in screenshot.
After clicking on webfig icon, login
prompt will ask you to enter username
and password. Enter login information
and click connect.
Now you should be able to see webfig
in action.
IPv6 Connectivity
RouterOS http service now listens on ipv6 address, too. To connect to IPv6, in your browser enter ipv6 address in
square brackets, for example [2001:db8:1::4]. If it is required to connect to link local address, don t forget to specify
interface name or interface id on windows, for example [fe80::9f94:9396%ether1].
Manual:Webfig 2
Interface Overview
WebFig interface is designed to be very intuitive especially for WinBox users. It has very similar layout: menu bar
on the left side, undo/redo at the top and work are at the rest of available space.
When connected to router, browsers title bar (tab name on Chrome) displays currently opened menu, user name used
to authenticate, ip address, system identity, ROS version and RouterBOARD model in following format:
[menu] at [username]@[Router s IP] ( [RouterID] ) - Webfig [ROS version] on [RB model] ([platform])
Menu bar has almost the same design as WinBox menu bar. Little arrow on the right side of the menu item indicates
that this menu has several sub-menus.
When clicking on such menu item, sub-menus will be listed and the arrow will
be pointing down, indicating that sub-menus are listed.
At the top you can see three common buttons Undo/Redo buttons similar to
winbox and one additional button Log Out. In the top right corner, you can see
WebFig logo and RouterBOARDS model name.
Work area has tab design, where you can switch between several configuration
tabs, for example in screenshot there are listed all tabs available in Bridge
menu (Bridge, Ports, Filters, NAT, Rules).
Below the tabs are listed buttons for all menu specific commands, for example
Add New and Settings.
The last part is table of all menu items. First column of an item has item
specific command buttons:
• - enable current item
• - disable current item
• - remove current item
Manual:Webfig 3
Item configuration
When clicking on one of the listed items, webfig will open new page showing all configurable parameters, item
specific commands and status.
At the top you can see item type and item name. In example screenshot you can see that item is an interface with
name bypass
There are also item specific command buttons (Ok, Cancel, Apply, Remove and Torch). These can vary between